HTV Easypatterns

Place Siser EasyPatterns on your vinyl cutter with the printed side facing you. A test cut before cutting a full design is always a good start. Your settings will vary based on the age and wear of your blade, cutter, and other cutting accessories.

Typically, HTV is cut with the carrier side down and the blade cuts through the adhesive on the back. Since EasyPatterns come with the pattern side facing up, you’re cutting through the front/face of the material.

After weeding, apply an application tape on top of the EasyPatterns with a squeegee. We recommend using TTD Easy for best results. The application tape (TTD Easy) usually comes with the HTV when you purchase from an Authorized Distributor or Reseller. Please note that TTD Easy might be placed inside the roll, so don’t throw away the cardboard tube until you’re sure it’s completely empty.